Newsroom
Blog
Company news, technical guides, and charcoal projects from around the world.
What corrosion protection options are available for marine environments?
Marine and offshore environments combine salt spray, humidity, and temperature cycling—ideal conditions for corrosion. Corrosion protection typically …
Read moreHow do I select a brake for low-temperature or outdoor applications?
Low temperatures affect viscosity of hydraulic fluids, elasticity of seals, and response speed of actuators. In outdoor applications, moisture can …
Read moreHow do I select a brake for high-temperature applications?
High-temperature braking requires both thermal capacity and friction stability. Start by evaluating the energy per stop (inertia and speed) and the …
Read moreWhat is the difference between a wedge brake and a wheel brake?
A wedge brake generates holding force by driving a wedge element into position, typically creating a strong mechanical locking effect that resists …
Read moreHow do storm brakes protect port cranes during typhoons or strong winds?
Port cranes are large, high-profile structures that can act like sails in extreme winds. During typhoons, the risk is not only uncontrolled travel …
Read moreWhat is a rail clamp and how is it different from a rail brake?
A rail clamp grips the rail head or rail sides to secure a rail-mounted machine in place, resisting wind forces and preventing travel. It acts …
Read moreWhat is a storm brake and when is it required?
A storm brake is a dedicated safety device used to secure rail-mounted equipment against wind loads when parked or during severe weather. It is most …
Read moreWhat brakes are typically used on cranes and hoists?
Cranes and hoists commonly use fail-safe brakes on the hoisting mechanism because power loss must not result in load drop. Typical solutions include …
Read moreWhy do downhill conveyors need special braking or holdback systems?
Downhill conveyors can become regenerative: gravity causes the loaded belt to drive the motor rather than the motor driving the belt. If power is …
Read moreWhat is a two-stage (two-step) braking system and why is it used?
Two-stage braking (also called two-step or dual-rate braking) applies braking torque in two phases: a controlled initial stage followed by a stronger …
Read moreWhat is the difference between normally open and normally closed brakes?
“Normally open” and “normally closed” describe the brake’s state when no power is applied. A normally closed brake is engaged by default and requires …
Read moreHow do I prevent oil or grease contamination on brake linings?
Preventing contamination is mostly about controlling leaks and protecting the braking area. Start by inspecting nearby gearbox seals, hydraulic …
Read more